GITS Manufacturing
  • Facebook
  • Linkedin
  • Twitter
  • Home
  • About
    • News
  • Catalog
    • Pressure/Vacuum Vents and Fusible Caps
    • Breather Vents and Expansion Chambers
    • Oil Hole Cups and Covers
    • Liquid Level Gauges
    • Bottle Oilers and Brush Oilers
    • Tubing Clips
    • Shaft Seals
    • Magnetic Plugs
  • Locate a Distributor
  • Products
    • Emission Control Products
    • Turbo Boost Products
    • Lubrication
    • Venting
      • Advanced Vent System (AVS)
  • Design & Development
  • Contact Us

Brush Oilers

Brush oilers save maintenance costs, protect machines from failure, increase chain life, conserve oil and power and solve production oiling problems.  See the easy to use diagram below to determine what configuration is best for your application.  Transparent Acrylic reservoir permits a quick visual check of oil supply. Large, self-closing cap is easy to fill and keeps out the dirt. Flow is controlled by a valve which immediately starts or stops the gravity feeding of the sight feed valve. To mount the dispenser simply provide a bracket to hold the 5/8″ x 18 NPT threaded mounting shank.

Choose your reservoir, available in sizes from 1 Pint to 1 Gallon in both Manual or Solenoid Shut-Off styles.  Manual valve model is easy to turn on and off by hand with the toggle mounted directly on the dispenser.  Solenoid valve model is recommended for intermittent use or for remote location of dispenser.  Flow is automatically controlled to stop and start with the machine driving motor.  The normally closed electric solenoid valve is usally wired across the motor or to a switch or timer.  These units come standard with a 115 volt coil but special coils can be ordered. 

Dispensers

 A. Manual

Item #
Type
Cross Section
Capacity
A. (Dia)
B.
D.
Visual Dispenser Manual w/Side Shut-Off
09502
Acrylic
A
1 PT
3-1/2
7-3/16
7-3/16
09503
Glass
A
1 PT
3-1/2
7-3/16
7-3/16
09504
Acrylic
A
1 QT
4-1/4
8-1/2
9-1/8
09505
Glass
A
1 QT
4-1/4
8-1/2
9-1/8
09506
Acrylic
A
1/2 GAL
5-1/2
10-5/8
11-1/4
09507
Glass
A
1/2 GAL
5-1/2
10-5/8
11-1/4
09508
Acrylic
A
GAL
5-1/2
15-5/8
16-1/4

 

B. Solenoid

Item #
Type
Cross Section
Capacity
A. (Dia)
B.
D.
Solenoid
                                                                         Visual Dispenser Automatic w/Solenoid Valve Shut-Off
09512
Acrylic
B
1 PT
3-1/2
7-3/16
7-3/16
120V/60HZ
09513
Glass
B
1 PT
3-1/2
7-3/16
7-3/16
120V/60HZ
09514
Acrylic
B
1 QT
4-1/4
8-1/2
9-1/8
120V/60HZ
09515
Glass
B
1 QT
4-1/4
8-1/2
9-1/8
120V/60HZ
09516
Acrylic
B
1/2 GAL
5-1/2
10-5/8
11-1/4
120V/60HZ
09517
Glass
B
1/2 GAL
5-1/2
10-5/8
11-1/4
120V/60HZ
09518
Acrylic
B
GAL
5-1/2
15-5/8
16-1/4
120V/60HZ

 

Additional Components

Brushes

Item #
Shape
Type
Diameter
09561
Flat
Nylon
–
09562
Flat
Stainless
–
09570
Roto
Nylon
–
09571
Roto
Stainless
–
09573
Round
Nylon
5/8″
09551
Round
Nylon
1″
09574
Round
Stainless
5/8″
09552
Round
Stainless
1″

For best lubrication of chain, locate brush on lower inside surface of chain so oil will penetrate links by centrifugal force. Brush should just cover width of chain. Gits Flat Brush mounted diagonally fits chain from 3/8″ to 2-1/4″ wide. Use standard bristles for most applications. For high-speed chain, use crimped Nylon (up to 250 deg F) or stainless steel bristles (over 250 deg F). Nylon Roto Brushes are designed for litho ovens and other heavy duty uses.

Brush Adaptor

Item #
09540

Mount brush so that bristles lightly “finger” the chain. Periodically rotate brush and reset height to compensate for brush wear. When 1/2″ of an adjustment is reached brush should be replaced with new Gits brush.

Sight Feed Valve

Item #
09530

The proper oil feed is just enough to keep the bristles damp. This is easily controlled by the sight feed valve. The drops can be observed and adjusted over a wide range, or can be completely shut off. The proper setting is retained with a friction screw. IMPORTANT: Locate feed valve where it can be conveniently and safely observed and adjusted.

Coupling

Item #
09520
09522

This coupling is used to connect the sight feed valve to the dispenser. For remote location of the dispenser use 1/4″ copper tubing and 1/8 NPT fittings between coupling and sight feed valve. Use No. 09522 to connect two or more sight feed valves together.

 

 

Automatic Flow, Bottle Oiler, Brush Oiler, Dispenser, Reservoir, Shut-off, Solenoid

Product Search

Find Distributor

Enter your city, state or zip.

Categories

  • Pressure/Vacuum Vents and Fusible Caps
  • Breather Vents and Expansion Chambers
  • Liquid Level Gauges
  • Oil Hole Cups and Covers
  • Bottle Oilers and Brush Oilers
  • Shaft Seals
  • Tubing Clips
  • Magnetic Plugs

Customer Service

  • 800.323.3238
  • info.gits@gitsmfg.com

Headquarters/ Product Innovation Center

  • 4601 121st Street
  • Urbandale, IA
  • 50323
  • 800-323-3238 Ext. 2
  • Fax: 1-641-903-2120
  • info.gits@gitsmfg.com

Gits Mfg China

  • No. 6 East Nanjing Road,
  • Taicang Jiangsu, China.
  • 215400
  • +86-0512-53287500
powerpackerus.com
© GITS Manufacturing | Privacy Policy